1974 CB360T. Doing the full carb disassembly and clean. As you know, the pilot jet is under a screw. I pulled the pilot jet out, and it was dirty but not the worse I've seen.
I got all the little holes on the sides clean and clear, but I still couldn't see the light down the middle. I pushed a small brass wire down the middle to no avail.
My question is, as the title says: Do these pilot jets actually have a hole down the middle??
(Now, before anyone jumps in to be the 1st to answer, I can verify that not all VJMCs have pilot jets with a hole down the middle).
So, how about the CB360T?
Thanks.
I got all the little holes on the sides clean and clear, but I still couldn't see the light down the middle. I pushed a small brass wire down the middle to no avail.
My question is, as the title says: Do these pilot jets actually have a hole down the middle??
(Now, before anyone jumps in to be the 1st to answer, I can verify that not all VJMCs have pilot jets with a hole down the middle).
So, how about the CB360T?
Thanks.
