Honda Twins banner

1 - 20 of 24 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
Selling some parts from past projects to fund future projects.

1971 Honda CB450 K4 - original parts - good condition original fenders, an immaculate original seat, clusters/gauges, points/plates, coils/bracket, control boxes, internal parts, several sets of original signals, lots more etc. etc. etc. - let me know what you need and I'll get back to you.
Aftermarket parts - PAMCO electronic ignition (plate, sensors, cam attachment, controller box, all necessary wiring), DCC 7/8" Clubman handlebars

1975 Honda CB360T K0
- Original parts - complete engine top end (jugs, head, cam, rocker arms, valve assembly, head cover, breather cover, tappet covers, etc.), complete clutch assembly (basket, springs, friction and pressure plates), rear shocks, right side engine cover and gasket, piston rings, points, huge variety of oil seals and gaskets, fork seals, bulbs, hardware, lots more etc. Similar scenario, let me know what you need and I'll get back to you.
- Aftermarket parts - Dime City Cycles CNC Billet triple tree/fork bridge/top clamp whatever you want to call it. Comes with gauge mounts and hardware. Tarozzi Billet clip on handlebars, Brooks aluminum and leather grips, plastic unknown throttle assembly, plastic unknown kill switch, 4into1 bullet amber signals front and rear, Emgo 13.5in eye to clevis adjustable Rear Shocks etc. etc.

Just let me know what you're in the market for and I'll get back to you with info and photos, and we'll work out shipping details (all parts from Nova Scotia, Canada).

Cheers lads.
 

·
Registered
Joined
·
16 Posts
Discussion Starter · #4 ·
$50 for PAMCO + shipping. Have 360 cylinder jugs, would need gasket material scraped off and a hone would be proactive. $30 plus shipping (as I dont know what else they'll take).
 

·
Registered
Joined
·
57 Posts
looking for clutch parts. specifically clutch plate A and the retainer ring that goes with it (mine is missing for some reason).
I'll take the whole assembly if that's easier.
 

·
Registered
Joined
·
16 Posts
Discussion Starter · #6 ·
Sure, say $50 for the whole assembly plus shipping? (bolts, springs, upper and lower basket, all pressure plates and friction plates, etc.)
 

·
Registered
Joined
·
57 Posts
Hey, I actually snagged one from a gentleman yesterday. Thanks though! If for some reason it’s missing what I need I’ll send you a messsge.
 

·
Registered
Joined
·
36 Posts
Do you think you could give me the prices(and pics too if possible) for the fenders, guages & clusters, and rear and front signals? Also if you happen to have a clutch lifter/actuator and a tach cable id be interested. Thanks
 

·
Registered
Joined
·
16 Posts
Discussion Starter · #9 ·
thomasaurus4 The next time I am at my storage place I will snap some pictures of the fenders and signals, and confirm whether I have a cable.
In the meantime, here is some photos of the cluster and fenders while it was still on the motorcycle. IMG_0573.JPG IMG_0671.jpg
 

·
Registered
Joined
·
2 Posts
CB 360 Question

What if anything do you have left of your CB 360 Parts ?


1975 Honda CB360T K0
- Original parts - complete engine top end (jugs, head, cam, rocker arms, valve assembly, head cover, breather cover, tappet covers, etc.), complete clutch assembly (basket, springs, friction and pressure plates), rear shocks, right side engine cover and gasket, piston rings, points, huge variety of oil seals and gaskets, fork seals, bulbs, hardware, lots more etc. Similar scenario, let me know what you need and I'll get back to you.
- Aftermarket parts - Dime City Cycles CNC Billet triple tree/fork bridge/top clamp whatever you want to call it. Comes with gauge mounts and hardware. Tarozzi Billet clip on handlebars, Brooks aluminum and leather grips, plastic unknown throttle assembly, plastic unknown kill switch, 4into1 bullet amber signals front and rear, Emgo 13.5in eye to clevis adjustable Rear Shocks etc. etc.

Just let me know what you're in the market for and I'll get back to you with info and photos, and we'll work out shipping details (all parts from Nova Scotia, Canada).

Cheers lads.[/QUOTE]
 

·
Registered
Joined
·
16 Posts
Discussion Starter · #19 ·
It is hard to keep track of inquiries from the thread so please PM me for desired parts and we'll get them off to you. Thanks, and sorry for the inconvenience/delays.
 

·
Registered
Joined
·
686 Posts
Do you still have the 450 centrifugal oil filter? I need that top part where the M6 screw goes in.
I‘m also looking for tank emblems but not sure if yours would fit on a K7 tank. PM send.
 
1 - 20 of 24 Posts
Top