Honda Twins banner
1 - 2 of 2 Posts

·
Registered
Joined
·
555 Posts
Discussion Starter · #1 · (Edited)
I did a dumb thing (cut my own gaskets) and evidently there was enough overhang to block the oil passage between the slinger and the right side cover on my '75 CB360. Ran it for about 20 miles without realizing, before hearing the squeal - popped the valve cover and lo and behold, I've fried all four rocker arms, the cam, and the journals on the valve and head. I'm shopping fleabay right now to find replacements, but wanted to see if anyone on here's got those on hand (prefer to not have to lap valves as I've never done it before) - I'd rather buy from you guys and get parts I trust.

TL;DR:

WTB CB360 valve cover w/ rocker arms, and cylinder head w/ valves.

Edit: gonna need a camshaft too. Murder me.
 
1 - 2 of 2 Posts
Top