Honda Twins banner

Wiring in new halogen headlamp

1040 Views 6 Replies 4 Participants Last post by  NE350
I was at the local auto parts store and found a h4 lamp that should work-size appears right and watts seem ok. My question is- the back of the new bulb has 3 metal tabs coming out. The back of the old lamp has the wires hardwired to the bulb. Can I just cut the wires off the old lamp and hook them directly up to the new halogen bulb via the tabs on back of the bulb? Or is there more to it than this? I need to change out the old lamp and and wondering how to go about this.
1 - 2 of 7 Posts
With the 3 connector socket, can i just wire it to the green/blue/white wires going to the headlamp from the headlight bucket? Or do i need to go farther back into the wiring system? Im a wiring novice, so any info/tips would be appreaciated.
1 - 2 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.