Honda Twins banner
1 - 5 of 5 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter · #1 ·
reassembling my engine and not sure where this goes. It was in the same bag of parts as my clutch pack and there appears to be a hole in the clutch housing where this almost fits, but doesn't stay in. The hole is slightly too small and I feel like it I forced it in, it would just pop out over time.
 

Attachments

·
Registered
Joined
·
3,348 Posts
It's tough to tell from your pic if that's a metal part or not, but from your description I'll guess it's a rubber part.

I took a quick look and it looks like #19 28305-310-000 CAP, KICK ARM
https://www.partzilla.com/catalog/honda/motorcycle/models-with-no-year/cb350k4-a/kick-starter

https://www.partzilla.com/product/honda/28305-310-000?ref=2dc2802bd5e16310662d493c87ee79d76ea5d628

Here's one for sale https://www.ebay.com/i/352185937001?chn=ps

Since this part is NLA, could a PO have made a substitution?
 

·
Registered
Joined
·
45 Posts
Discussion Starter · #3 ·
No it's an opaque rubber piece. Unfortunately it's too small to fit the end of the kick arm, but also puzzling is I never had a cap there to begin with. Seeing as that's just a dust cap for grease, I'm not too worried about it.

I initially thought it belonged here, but looking at other photos online, they don't have anything there either.

Auto part Rim Wheel Automotive wheel system Rotor
 

·
Premium Member
Joined
·
2,154 Posts
Only thing I've seen like that is oil block piece between crankcase halves, except it was on XS650 :D
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top