Honda Twins banner
1 - 6 of 6 Posts

·
Registered
Joined
·
160 Posts
Discussion Starter · #1 ·
I am looking for a good set of forks from either a CB400F or a CB360. I don't need crowns etc... just the complete fork legs.

Let me know what you have.

- Woody
 

·
Sensei
Joined
·
27,183 Posts
Woody, I have a spare pair of CB 360 forks..... E-mail me .... Steve
 

·
Registered
Joined
·
160 Posts
Discussion Starter · #3 ·
My CL has pinch bolts on both the top and bottom trees. As long as the tubes are 33mm all the way up I don't see why they wouldn't work. What's your email addy?

- Woody

Edit:

Mine is just like this...

 

·
Sensei
Joined
·
27,183 Posts
I just realized you already had them up through...(Duh!).... [email protected] ......Steve



For proportions, that's a stock 350 front wheel....
 

·
Sensei
Joined
·
27,183 Posts
Woody....I measure 27 & 1/2" from axle center to the top of the TUBE (not adding the flange on the cap bolt/nut)...Hope that's what you're looking for.... Steve
 

·
Registered
Joined
·
160 Posts
Discussion Starter · #6 ·
Thanks Steve. I'm still trying to score a set on the 'bay that are pretty cheap. I figured if I'm gonna do this thing I might as well do it right with a full rebuild of the forks with new seals/oil/ along with the newsprings and powdercoat on the lowers. Yours are too nice to pull apart. If I can score these other ones for like $25 then cool. If I don't get them I will probably take yours.

On another note. You did say on the phone the other night that you had some 350 stock headers? What condition are they in? I might just through some hi-temp black on them if they are a little rough, but serviceable. I'm not having much luck finding any otherwise.

Let me know.

Thanks,
Woody
 
1 - 6 of 6 Posts
Top