Honda Twins banner

1 - 5 of 5 Posts

·
Registered
Joined
·
755 Posts
Discussion Starter #1 (Edited)
Sloper parts sale! 160 and 175 stuff. I'm in Phoenix, but happy to ship. Will be out of town for a month, so can ship around May 1.
160light1.jpg
37749-030419182735.jpg
37749-030419182753.jpg
This is a headlight ring off of a CB160. It's straight, with just a touch of rust on the underside (no treally visible unless you're under 3 feet tall). Light was working lst time I checked. $30 + postage.

37749-030419182813.jpg
37749-030419182838.jpg
37749-030419182857.jpg
37749-030419182929.jpg
37749-030419182948.jpg
37749-030419183020.jpg
CB160 exhaust. The first picture -- they're amazing! But look a little closer... these could be repaired or restored, check all the photos. The seams on the underside seem to be solid, which is good, but there are a couple holes. $65 + ship.

37749-030419183508.jpg
37749-030419183448.jpg
CL175 Sloper headers, flanges, and one mount. Cut off at the muffler. Some rust, but they'd clean up a little. $60 + ship.
 

·
Registered
Joined
·
755 Posts
Discussion Starter #2
37749-030419183428.jpg
37749-030419183408.jpg
This is a CL175 sloper seat pan. cover obviously knackered, but the insides are good! Looks like all of the springs, and looks like the frame is in good shape. $50 + ship.

37749-030419183347.jpg
37749-030419183328.jpg
37749-030419183302.jpg
Front fender for a CL175 sloper. Rusty, would need to be rechromed or painted, but it's pretty straight with no big dings. $25 + ship.

37749-030419183105.jpg
37749-030419183040.jpg
37749-030419183126.jpg
37749-030419183148.jpg
37749-030419183214.jpg
37749-030419183236.jpg
CL175 Sloper tank with cap and mounting bolt. It's in good shape, and comes with the bird poop pictured here! There's one small ding on the left front corner, and would need to be washed out or lined. Looks like the seams on the underside are in good shape. $40 + ship.
 

·
Registered
Joined
·
755 Posts
Discussion Starter #3
Taking reasonable offers... I'll be back in AZ in two weeks.
 

·
Registered
Joined
·
167 Posts
Will the headlight from the CB160 fit an early CL175 sloper bucket. it is the one with the speedo in the top of the bucket. If you post some other pics of it I can compare it to the one that is in there already.
 

·
Registered
Joined
·
755 Posts
Discussion Starter #5
Yes, same part, will fit.
 
1 - 5 of 5 Posts
Top