Honda Twins banner

right master link for cl350 drive chain?

409 Views 2 Replies 2 Participants Last post by  jml
From what I can tell the CL350 used a 530 roller (non-O-ring) chain. Mine came with the chain already broken, but most of the master link. It had three O-rings, the stake, and the outer plate, but not the clip (which obviously should be replaced anyway). For the moment I want to just use the existing chain while I do some shakedown on the bike, but I'm having trouble finding just a Honda replacement link without the entire chain. What is the right replacement link to use? Can I use an O-ring master link on a roller chain, or do I need to find a roller link?
1 - 1 of 3 Posts
You need a plain link, not one for an o-ring chain. Any standard 530 chain master link should work fine - it doesn’t need to be a “Honda” replacement link.
  • Like
Reactions: 1
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.