Honda Twins banner

Removing Valves?

1836 Views 11 Replies 6 Participants Last post by  qcrider
I'm gearing up for this head teardown and rebuild, and in looking through the shop manual, it appears I'm going to need a valve spring compressor. I've seen a couple of DIY ones used, but I don't have the means. I've also found one on eBay for about $45.

Before I do anything, I wanted to see if you guys had any tips or tricks.


1 - 1 of 12 Posts
fasterspider said:
This is the valve spring compressor I use that came from ebay for less than $50.00 including shipping.

Item # 270387796936 on ebay

Okay long shot here - do you know if this compressor will work on a harley evo head or could I get you to take some messurements for me?

Depth of the C and distance between compressing points with the attachment installed.

Any help you can give me would be appreciated

1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.