Honda Twins banner

1 - 4 of 4 Posts

·
Registered
Joined
·
57 Posts
Discussion Starter #1
They are Honda rings (unless they swapped) from partzilla. That's why this is weird.
I have searched for days and can't get specific help.
All aftermarket ones usually say from top:
1: Chrome looking one
2: Dark cast iron look. (my dark cast looking one has an 'N' on it.)

But I have honda rings for a CB450t/sc
The manual only has from top:
1: Square with 'T' marking. (Should my 'N' ring be on top?)
2: Angled ring with no marking.

The only angle I can see is the inside of the chrome ring! Not the outside like in the manual.
Hmmmmm.
LDR thought they would be after market, and therefore be 1: chrome. 2: Cast iron...
 

·
Registered
Joined
·
9,796 Posts
Chrome one always on top. Cast iron second. Any marking on the rings face up.
 
  • Like
Reactions: CBSigmund

·
Registered
Joined
·
57 Posts
Discussion Starter #3
That's what I'm thinking and how I had them but why does the manual have the top ring with the marking?
Anyway, the gap in the piston for the top ring seems slightly smaller than the 2nd, and the chrome ring is smaller than the cast one, so that makes sense to have it that way.
 
1 - 4 of 4 Posts
Top