Honda Twins banner

No fuel in bowl

1216 Views 5 Replies 3 Participants Last post by  J-T
Hi. This is my first post. I am trying to restore a cm 250c 1982 Honda. Cleaned all the jets and carb but seems like the fuel is not going to the bowl. Took the carb off and tried blowing on the gas fitting but plugged. Is theren a way to unplug it ? tryed using carb cleaner to blast it open buy just sprayed back . Or is it something i am missing. I am a newbie so i am just learning.... Thank you.:confused:
1 - 2 of 6 Posts
Remove the float bowl, then remove the float and float valve. If you have access to an air compressor, blow from where the float valve goes into the seat. If no air, try spraying carb cleaner the same direction, or, use a flexible wire or guitar string to work whatever is in there out.
Unlikely since you just cleaned the carbs,,,,,,,,,,,,,,,,,,but.............................
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.