Honda Twins banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
i just got my cb350 running about a month ago, have a few issues with the motor to work out, looks like this is the place, but right now i have an issue with the clutch, it work fine, you can shift, but if you pull it all the way in(flush with the grip) it pops and the lever rests on the grip until you force it back out about half way and it pops again, works fine again.
as long as i just pull it in 2/3's (which is enough for the clutch to work) it's fine.
i assume that this will become more of a problem later or tear something else up so i would like to hear what you guys think before i get into it.
thanks
andy
p.s. i looked in the search but didn't get an answer for this specific ?.
 

·
Registered
Joined
·
6,495 Posts
At least you tried a Search-

It's almost always involved with parts # 9, 10, and 6.
Sometimes part #9 (22860-286-000,RETAINER, CLUTCH BALL - NLA) actually cracks.
Sometimes the "grooves" in 6 or 9 get goobered up.
Sometimes it's just an adjustment problem, which can get finnagled out.....
Only part #9 is still available.

 
1 - 2 of 2 Posts
Top