[Kadaver]

I recently got ownership of a CD200 RoadMaster,

I would like some advise on how to get it running, I have cleaned the carb and put in working spark plugs, The problem I now have is no spark to the plugs. I have removed the starter motor as it was not functional. The coil looks to be in good shape, but I think there might be a problem with the "magnetic starter switch" (this is my asumpton of what its called as it went to the starter motor from the batterry and too the start button).

I can also not find any schematic diagrams for this specific model, any help in that department will also be much appreciated.

The overflow on the carb drips at a very very slow rate any advise on this would also be greatl appreciate

Thanks

Kadaver

 

[dtsmjr8dan]

Welcome to the forum, Kadaver. Got any pics?

 

[66Sprint]

We will need to know the model year to determine if it's point or electronic ignition.....
As to the overflow, re-set the floats to spec....

 

[nigelrharris03]

Welcome to the forum yes pics would be great

 

[Kadaver]

It doesnt allow me to add a picture, it has a point ignition system, I have spoken to few guys about this project and all of them says the best thing i can do is convert from a 6V system to a 12V system, How should this be done? what needs to be replaced?