Honda Twins banner
1 - 2 of 2 Posts

·
Registered
Joined
·
207 Posts
Discussion Starter · #1 ·
Bike: 1971 CL175K5, but I suspect other years will interchange, as well as CB175's.
Part wanted: centerstand and the tube that the centerstand pivots on.
Must be straight and solid, my stand is already rusty, looking for a good one.
Thanks for any leads or help! :p

[email protected]
 

·
Registered
Joined
·
608 Posts
Re: need '71 Honda CB/CL175 centerstand pivot tube

I had a pivot made for my 450, just a lenght of tubing turned to size, cross drilled one end to accept a cotter pin with flat washer, measured lenght and drilled and cottered/with washer the other end if you have your old tube you can find dia. and lenghts easy
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top