Honda Twins banner

1 - 2 of 2 Posts

·
Registered
Joined
·
357 Posts
Discussion Starter #1
1. At what point should the kick pedal engage? Mine doesn't make contact until about 3/4 the way through the stroke. Barely enough bite to kick the thing over.

2. Can this be fixed by simply removing the pedal, and repositioning it on the shaft?
Allen
 

·
Sensei
Joined
·
27,164 Posts
Yes, USUALLY.... It should just engage at about the 10 O'clock position.... But shouldn't strike the case in the forward position either.....Could be the "guide" spring/clip inside is in the wrong position as well... Steve
 
1 - 2 of 2 Posts
Top