Honda Twins banner

1 - 7 of 7 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hey Guys,

First post so bare with me.

As you guys know the 500t has the 5 wire ignition switch, doesn't look great if you're going for the cafe look.

I'm ok with just having an On/Off switch somewhere on the bike, but don't want to just start randomly cutting these wires.

I've looked at diagrams but haven't gotten much out of it.

Is there a thread on here that walks your through a key delete? Turning it into a simple on off switch?

Thanks
 

·
Registered
Joined
·
2,837 Posts
I think 66 sprint has posted simplified diagrams many times. Try a google seach I've never had much luck with the sites search function
 

·
Registered
Joined
·
2,984 Posts
Join the brown and brown/white wires, then connect your switch to the red and black wires.
 

·
Sensei
Joined
·
27,160 Posts
Mike is 100% correct....Connect both brown wires to the Brown/White wire, and the On/Off switch activates (makes or breaks) the Red wire to Black wire connection.....
 
1 - 7 of 7 Posts
Top