Honda Twins banner

1 - 7 of 7 Posts

·
Registered
Joined
·
148 Posts
Discussion Starter · #1 ·
The previous owner's changes have been undone. The saddle seat has been replace with the original seat and the clubman handlebars/instrument panel replaced with original style handlebars and switches. I also got turn signals installed and working again.

I also removed the carbs, cleaned all the jets and passages thoroughly, reset the air screws, synchronized them, and now it runs much better with no backfiring.

The front brake is back on now too (after the second pic). Stick two mirrors on and it's ready for inspection!

AS I GOT IT:


AS IT STANDS NOW THE DAY BEFORE I ADDED THE FRONT BRAKE LEVER AND LINE:
 

·
Premium Member
Joined
·
1,612 Posts
I sure wish there were more CB450's down under...only ever saw one...and that was in Rods garage (otr002).

Good job undoing the PO's folly.
 

·
Premium Member
Joined
·
2,386 Posts
Nicely done, it's good to see another one restored to original condition.

Are those the stock height handlebars?
 

·
Registered
Joined
·
608 Posts
mitchell want to sell that solo seat?
 

·
Registered
Joined
·
3,926 Posts
Notice the Honda hub and Honda speedo drive parts though.. ;)

It's possible it's off of a CB750A as well...

GB :mrgreen:
 
1 - 7 of 7 Posts
Top