Honda Twins banner
1 - 3 of 3 Posts

·
Registered
Joined
·
204 Posts
Discussion Starter · #1 ·
started taking valves out and noticed front cam chain guide roller has a fair bit of play and wobbles a bit when I spin it .. the rear one is much tighter doesn't spin so easily with a bit of drag . could someone please tell me what is acceptable play ... thanks
 

·
Premium Member
Joined
·
680 Posts
it is normal to have a bit of slop in the rollers providing the rubber part of the roller is in good condition I would use it, If the rear roller is a bit stiff that is a worry it should spin as freely as the front. Perhaps a little thin oil or kerosene and working it a bit will free it up?
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top