Hi All,
As I understand it, the float height for my 3-c carb on my '69 cb350 is 21mm. I set the heights accordingly. When I hooked them to the fuel lines both had fuel coming out of the bottom, through the overflow tube in the carb bowl. That symptom lends me to believe I had set the height incorrectly. I took the carbs apart, watched some videos on how to set the height and did it again. I can't figure out what I'm doing wrong. At 21mm the float is nearly bottoming out. Do I have the right floats for my carbs? (see photo, I included caliper for good measure--pun intended).
Thanks in advance.
As I understand it, the float height for my 3-c carb on my '69 cb350 is 21mm. I set the heights accordingly. When I hooked them to the fuel lines both had fuel coming out of the bottom, through the overflow tube in the carb bowl. That symptom lends me to believe I had set the height incorrectly. I took the carbs apart, watched some videos on how to set the height and did it again. I can't figure out what I'm doing wrong. At 21mm the float is nearly bottoming out. Do I have the right floats for my carbs? (see photo, I included caliper for good measure--pun intended).
Thanks in advance.