[sharp21]

Okay!
Inspired by this thread:
http://www.hondatwins.net/forum/viewtopic.php?f=15&t=659
I have made a list of nuts & bolts from the CL350 Fiche (which I printed & laminated for use with greasy fingers!) found here:
http://www.mrcycles.com/fiche_select2.asp?category=Motorcycles&make=Honda&year=1971&fveh=3143
I dont claim that it is fully comprehensive as the parts list on the fiche is sometimes doubled, or some nuts & bolts just only have a honda part & no size, but it is a pretty good start that you can take to your local bolt supply & get stainless bits for your rebuild. Or else go to BoltDepot.com & place your order!
I divided my list up by type & size unlike Bill who split his by area.
If they dont have one of the listed lengths, just get the next longer one.
Also, I intend to add 10% or so to this order for wastage/spares.
I have the list on a txt file so pm me if interested
Next stop; AES Bolt Supply!
:mrgreen:
S.

 

[tbpmusic]

I think my list is divided by area, then size/type as well - the formatting jsut got a little scrambled translating it into Microshaft Word.
I also have a list for CB200.....


So where's your list, dude???
Post that sucker so we can download it !!!

 

[sharp21]

I figure that inquiring minds can refer to the fiche to see where everything goes.
Plus im not that keen! Here is the list:

Hex Bolts
5x18 - 1
5x20 - 2

6x8 - 5
6x10 - 2
6x12 - 13
6x14 - 2
6x16 - 8
6x20 - 8
6x22 - 1
6x25 - 4
6x32 - 3
6x35 - 5
6x38 - 2
6x45 - 2
6x56 - 3
6x71 - 2
6x78 - 2
6x100 - 2
6x140 - 1

8x16 - 4
8x20 - 3
8x25 - 3
8x28 - 1
8x32 - 3
8x35 - 2
8x40 - 2
8x85 - 1
8x97 - 2
8x115 - 1
8x150 - 1

10x25 - 2
10x32 - 4
10x50 - 1
10x63 - 1

Misc Bolts
6x14 Knock Bolt - 1
8x36 Flange Bolt - 4
8x50 Stud Bolt - 4


Hex Nuts
5mm - 2
6mm - 27
8mm - 26
10mm - 13

Acorn Nuts
8mm - 8

Lock Nuts
14mm - 1
16mm - 1

Castle Nut
16mm - 1

Flange Nuts
10mm - 2

Speed Nut
3mm - 1


Washers
3mm - 1
4mm - 5
5mm - 1
6mm - 65
8mm - 31
10mm - 10
12mm - 3
14mm - 4
16mm - 1
18mm - 7
20mm - 3

Spring Washers
3mm - 1
4mm - 4
5mm - 6
6mm - 21
8mm - 13
8mm Washer Seal - 8
10.3mm - 2
12mm - 1
6x19 - 4
7x12 - 2
14x26 - 1
15x1 - 1
16.5x30 - 1


Pan Head Screws
3x6 - 4
3x7 - 1
3x8 - 1
4x8 - 10
4x10 - 8
4x20 - 2
4x50 - 2
5x6 - 1
5x8 - 2
5x12 - 2
5x16 - 4
5x25 - 4
5x28 - 3
6x10 - 4
6x12 - 3
6x14 - 9
6x16 - 6
6x20 - 3
6x25 - 5
6x28 - 8
6x32 - 4
6x35 - 2
6x40 - 1
6x50 - 4
6x55 - 2

Flat Head Screws
6x20 - 2
6x25 - 3

Oval Head Screws
5x16 - 4
5x20 - 3
6x10 - 2
6x40 - 3


Clips & Pins
1.6x12 Split Pin - 1
2.0x15 Split Pin - 1
2.0x22 Split Pin - 3
2.0x35 Split Pin - 3
4.0x30 Split Pin - 1

5mm Lock Pin - 2
6mm Lock Pin - 2
8mm Lock Pin - 1

1.6x25 Cotter Pin - 4
2.5mm Cotter Pin - 1

12mm CirClip - 1
18mm CirClip - 1
25mm CirClip - 1
32mm CirClip - 1
45mm CirClip - 1
64mm CirClip - 1

S.

 

[MNellis]

That's a good looking list.

Bills list had the totals for each bolt size in addition to the category. The totals were in the right had column. The phillips for the carb caps were down at the bottom by themselves.

The catagories are helpful for me as I go to put things back together. For example, I went out this morning to put the instruments back together and the catagories were helpful in finding the right bolts. Otherwise I would have had to find the original size bolts and match them up. Unfortunately the originals were rolling around with a bunch of other bolts in a container.

Your list will be helpful to me on my '68 CL350 though. I plan to pull it all apart next winter and take it down to the frame and take the motor apart.

Thanks

 

[tbpmusic]

Mike -

If you can make any ammendments to my list, please do so and post the file so we can all get it.

 

[MNellis]

I figure that inquiring minds can refer to the fiche to see where everything goes.
Plus im not that keen! Here is the list:

Hex Bolts
5x18 - 1
5x20 - 2

6x8 - 5
6x10 - 2
6x12 - 13
6x14 - 2
6x16 - 8
6x20 - 8
6x22 - 1
6x25 - 4
6x32 - 3
6x35 - 5
6x38 - 2
6x45 - 2
6x56 - 3
6x71 - 2
6x78 - 2
6x100 - 2
6x140 - 1

I forgot to mention this suggestion. As I placed my order the vendor did not have all the odd sizes. For example 6x32, 6x71 would be considered odd sizes to my vendor. They asked if I could go to the next longer size (as Bill mentioned) and I readily agreed. They may have been able to order the proper size but it wasn't necessary to me.

You might consider consolidating some of the lengths that are close together. Maybe 6x35 and 6x38 could just be (7) 6x38. 5mm = 1/4" (.196) so unless you have a particular need for the exact it might be easier on you and the person 'picking' the order to consolidate wherever possible. It also makes it a little easier when trying to keep bolts organized in your bins.

 

[MNellis]

Mike -

If you can make any ammendments to my list, please do so and post the file so we can all get it.

I sure will Bill. I'm just now starting to use the new bolts and I'll update the categories as I go along.

 

[Bird76Mojo]

Mike -

If you can make any ammendments to my list, please do so and post the file so we can all get it.

I sure will Bill. I'm just now starting to use the new bolts and I'll update the categories as I go along.

Yes... Yes, my children.. Muahahaha!! Do my bidding! :lol: Seriously, after you guys do the guinea pig work on that 450 list, i'll order up my bolt set. SO, keep up the good work!!


GB :mrgreen: