[Mondo72]

72' Cl175 k6. What position should the stator and head cam be in when affixing the chain. I cannot find the manual that states the specs, and believe I have it completely backwards. The mold mark looked like the most obvious top position on the cam, and the stator was aligned with the T.

manual W spec or experience please!

 

[Richard_Pitman]

Stator at 'T', cam as shown with stamped 'o' at top centre.

 

[Mondo72]

Thank you sir. I found that in the manual, however, was unable to find the marking on my second try. Now the motor comes out for a third time, and I'll not reassemble until I find the "o". My friend is a mechanic, and we thought for sure we had the correct position because we were unable to find the marking, so we watched the valve action, and did our best. Wrong.

thanks for your response, I'll let you know if I find the "o"!