Honda Twins banner
1 - 9 of 9 Posts

·
Registered
Joined
·
1,431 Posts
Discussion Starter · #1 ·
I need a working CL/CB 350 headlight.

went to winterize the bike last weekend, and it burnt out the low beam :(

Let me know what you've got!



Jason
 

·
Registered
Joined
·
6,495 Posts
That would be the larger 7" unit, no??

Let me check - I may have one from a 450, I think it would work.
It's pretty cold out there right now, though !!
 

·
Registered
Joined
·
1,431 Posts
Discussion Starter · #3 ·
mine is the smaller 5 3/4" headlight.

the 7" on my cb500 looks considerably larger.


Thanks!
 

·
Registered
Joined
·
6,495 Posts
Jason -

I have one that may be what you need - but not sure.
It's definitely not the larger 7-incher.
It says "Stanley 001-012" and "SAE M71", has a three-pronged connector, not three wire leads.
Both filaments work.... I think it was off a '79 CB400T, maybe? I really can't tell if it's the smaller one or maybe an intermediate size.
I also have one that I know is right, off an old 450, but it doesn't work.
 

·
Registered
Joined
·
1,431 Posts
Discussion Starter · #5 ·
One of the following headlights will work:

These are all the same (12v 35w/25w) fiche # 33100292674

154mm i believe?

1967 Honda CL450
1968 Honda CB450K1
1969 Honda CB450K2
1969 Honda CL450K2
1970 Honda CB175K4
1970 Honda CB350K2
1970 Honda CB450K3
1970 Honda CL350K2
1970 Honda CL450K3
1971 Honda CB175K5
1971 Honda CB350K3
1971 Honda CB450K4
1971 Honda CL350K3
1971 Honda CL450K4
1972 Honda CB175K6
1972 Honda CB350K4
1972 Honda CL350K4
1972 Honda CL450K5
1973 Honda CB175K7
1973 Honda CB350G
1973 Honda CL350K5
1974 Honda CB200
1974 Honda CL200
1974 Honda CL450K6
1975 Honda CB200T
1976 Honda CB200T
1976 Honda CJ360T
1977 Honda CJ360T
 

·
Registered
Joined
·
6,495 Posts
Oh man, now you made my head hurt, dude.
I don't know what bike this one came off, and I don't have any calipers that will open to 154 mm.
 

·
Registered
Joined
·
1,431 Posts
Discussion Starter · #7 ·
hah.

no problem.

i think i'm going to try to switch it to a 6 or 7" ...

it's a little dim on the low beams at night... and i would like to ride it at night safely.

or, maybe it was just burning out?

who knows! we'll find out.
 

·
Sensei
Joined
·
27,183 Posts
Have you considered converting it to take a halogen?... I believe I still have one 6" glass/beam unit.....If I can find a 350 shell, I'll trial fit it..... It takes a standard H-4 bulb.
 

·
Registered
Joined
·
1,431 Posts
Discussion Starter · #9 ·
66Sprint said:
Have you considered converting it to take a halogen?... I believe I still have one 6" glass/beam unit.....If I can find a 350 shell, I'll trial fit it..... It takes a standard H-4 bulb.

if you had one , i would switch it in a heart beat.

I switched everything over to LED's (in the original enclosures) for the power savings, but I couldn't find a H4 unit that would fit ...

let me know, if you don't have a shell i'll buy it and try it myself?


Thanks!

Jason
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top