I think it is time for a new chain and sprockets. I am thinking about either going one or two teeth more on the rear or one down on the front for more zip. I never ride my 79 CB400 TI on roads that have speed limits above 55 mph, at least not for more than a few miles. Thus, I am rarely in 5th gear. Looking to hear others' experiences.
Chain and Sprockets
Join the discussion
Recommended Reading
-
Do CB350/400F hubs/wheels fit on a CM400?
Tires, Wheels, and BrakesHey guys, thx for admitting me to this forum! Always a pleasure to talk to people who share the same interest :). Planning to buy a CM400T (1981) with comstar wheels and doing a modification to single shock and spoke wheels, to get the old school look. I know that the best solution would be...- 8
- 206
-
Dew · updated
-
Brake line replacement reference
Tires, Wheels, and BrakesThis last weekend I finally replaced the 36 year old hydraulic brake line on my CB400. It was cracking and routed funny because I had changed out the stock bars for superbike bars. It had been too long and I was beginning to really worry about it. So I ordered a custom stainless steel braided...- 10
- 4K
-
jbergen · updated
-
Confusion about front brake caliper piston and pad sizes and CB450SC model years
Tires, Wheels, and BrakesSo I'm working on rebuilding the front brake caliper (replacing seals, pistons, and pads) on my 1985 CB450SC. The first strange thing I noticed was with the pistons. The ones I pulled out were 31.5mm long, yet the ones I bought from Brakecrafters (which claim to fit '82-'86 model years are 35mm...- 2
- 48
-
brian450 · updated
-
Nighthawk 1982 in need of repair
Tires, Wheels, and BrakesHi guys, new to this forum but have been trying to get a new front caliper kit for my Honda Nighthawk cb450sc and have had no luck. The bike is in great condition but with the front caliper needing a service this is stopping me from partaking in rides with my mates and other collectors. I am in...- 15
- 228
-
Nathan nighthawk · updated
-
Shorter brake line
Tires, Wheels, and BrakesHey guys I put clubman style bars on my 81’ CM400T and the front brake line is to long. Does anyone have any suggestions about line size, companies, or custom making lines. (On a side note the throttle and clutch cables are a bit long too.) so I’m gonna need to explore that too.- 2
- 44
-
NickCM400 · updated
Join now to ask and comment!