Honda Twins banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi all!

This is my first post here in the Hondatwins community, so bear with me...

I am looking for a new set of cylinder jugs for my 1972 CB450 rebuild. I took them to a local vintage motorcycle rebuild business here in Ferndale, Michigan. There was some cylinder wall damage on the left side after a hole was blown through my left piston. The cylinders went through three iterations of boring and after having purchased a final set of +1.00 mm oversize pistons, I received them back and was told they were out of round.

I am wondering if anyone has any extra jugs laying around that they wouldn't mind offloading. 1st-3rd over bore would be ok. Any help is appreciated! Thank you!

-Charles
 

·
Registered
Joined
·
3,537 Posts
Sounds like the machine shop blew it. 1 mm overbore from stock should clean up nearly anything. For this ebay is your friend.
 

·
Registered
Joined
·
135 Posts
I have a cylinder I'll sell you. Fresh out of the bead blaster. 4300 miles on it. Email me for photos.
rec48ataoldotcom
 
1 - 3 of 3 Posts
Top