Honda Twins banner
1 - 1 of 1 Posts

84 Posts
Discussion Starter · #1 ·
Hello all,

I am becoming increasingly frustrated with my cb175 k3. I have recently fitted DS replica mufflers and downpipes, and also fitted a set of original NOS air filters.Expecting everything to be fine I put in the stock 98 main jets, but she won't run more than 5 miles before bogging down and misfiring etc.The plugs are jet black,dry and sooty.
On reading a few posts on this site this afternoon, I realise that I measured the float heights from the edge of the carby and not from the gasket base with the gasket removed.This would give a reading of 25 mm instead of the 21mm question is,would this extra 4mm cause the overich problem?

Thankyou, Graham
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.