Honda Twins banner
1 - 3 of 3 Posts

·
Registered
Joined
·
160 Posts
Discussion Starter · #1 ·
I just replaced the swingarm bushings and seals on my CL350 to remove the slop. My question is what value should I retorque the main pivot bolt to? I looked through my manual and I couldn't find a torque value.

Thanks,
Woody
 

·
Registered
Joined
·
608 Posts
51-65 ft-lb. but more important is side to side movement, should be 1mm (.039) or less, a slight drag on the swingarm as it pivots is ok
 
1 - 3 of 3 Posts
Top