Honda Twins banner

1 - 2 of 2 Posts

·
Registered
Joined
·
589 Posts
Discussion Starter #1
Fellas

Maybe I put this post in the wrong place last time (given the lack of response), so I'll try again . . .

I've gone through 2 manuals (Honda's own and Chilton's) looking for service data on the cam chains for these bikes, but I'm not turning up anything. I've got specs for just about every other internal part, but for the life of me I can't find any measurements for the cam chain.

The best guide I've got right now is that the bike did less than 8,000 miles before being left stood (for what looks like a very long time). It's still fully flexible and there was oil (and no water) in the engine when I got the bike, so I'm guessing it's probably fine to continue using. But I'd like to be able to measure it up if only to be on the safe side.

Any ideas out there?
 

·
Registered
Joined
·
3,926 Posts
If you've got it apart anyway, then why not replace it with a new chain? Cheap insurance if you ask me...


GB :mrgreen:
 
1 - 2 of 2 Posts
Top