Honda Twins banner

Carburetor Rebuild, plastic piece with needle

1008 Views 2 Replies 3 Participants Last post by  83XLX
Hello all, I'm new here and I am currently in the process of disassembling my carburetors for my '69 CL350 and it seems this plastic piece where the needle sits has been cracked for some time. Is there any way to replace this or will I have to buy new carbs?
Wood Circle Button Font Household hardware
See less See more
1 - 1 of 3 Posts
Just put a little glue into the crack before it breaks any more. Their only job is to loosely hold the needle in place, and a repaired crack will have no effect on the carb operation. As far as I know, there are no replacements available, so if you do want to replace it, a used one is the only option.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.