Honda Twins banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi you guys,
Thank you very much for having me. All of you have helped me so much in the past with all the info you’ve posted. Currently I am building a 75 Honda CB 360t well just like most of you I’m having carb problems. So I’m gonna be running pods and aftermarket exhaust so I felt I should jet up, (bought it not running mind you) so I put in 105, 90, 40, all good running lil rich , how I wanted to start tuning. Valves are to spec, timing and plug gap as well. Anyways
Idles great at 1200rpm then when I accelerate it gets really boggy I’ve cleaned the plungers a week ago but I noticed slow response when looking at them with a light and running. Turn it off pull carbs blow in the ports of carb and CLICK, CLICK moving fine . What the hell!! Need your help, thank you
 

·
Premium Member
Joined
·
10,203 Posts
We do have some folks here who are very familiar with your carbs, if you're real lucky Crazy PJ will be along. While you're waiting, please review the stickies in the new members section:

 
1 - 2 of 2 Posts
Top