Honda Twins banner

1 - 4 of 4 Posts

·
Registered
Joined
·
170 Posts
Discussion Starter #1
Snapped one, and need to replace. My hardware store didn't have the exact size I needed. I tried posting in the manuals section looking to see that part catalogue but its not working. Sorry guys. I do think this will be a helpful article for others to reference though!

Here it is from my build thread:
58eb7f7ee52851ad0f56c4028549cd23.jpg
 

·
Registered
Joined
·
9,796 Posts

·
Registered
Joined
·
170 Posts
Discussion Starter #3
After some poking around at the hardware store, I determined the correct size and ordered from the BoltDeport.com. They have the metric bolts you need and you can order in as small a quantity as you want. Only option was stainless steel, but as advised I just lightly coated under the head/washer (they didn't have flange bolts) with anti seize. Same story with the threads....anti seize to slow corrosion.

The *thinner* crank case bolts were all of varying lengths but of the "m6 x 1.0" variety. The bolts are slightly longer nowadays but will still fit.
 

·
Registered
Joined
·
631 Posts
Hi Fillmarr this fiche has the bolt sizes you were looking for:
IMG_2446.jpg
IMG_2445.jpg
Good luck with the rebuild!
Nigel.
 
1 - 4 of 4 Posts
Top