Honda Twins banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have a CM400 and it seems like there is too much play in the clutch rod on the case. I can move it a good half inch before it starts to actuate. I checked the spring plate on the clutch pack itself and it's tightened all the way down. Do I need a new clutch rod or maybe a new set of friction plates?
 

·
Premium Member
Joined
·
10,203 Posts
You need to adjust your clutch as explained on page 3-9 of your Factory Service Manual.

Just on the off chance that you do not possess a Factory Service Manual, I've sent you a Private Message.

Welcome to the group.

Got pictures?:p
 

·
Registered
Joined
·
9,797 Posts
Welcome to the forum. Great to see another 400 series here. +1 on pics, especially the clutch arm.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top