Honda Twins banner

74 CB450 jets question

11822 Views 16 Replies 5 Participants Last post by  Henryinva
Okay, finally got the bike started, which was a good thing. Wont idle but is running on both cylinders. So, heres the question as the carbs are going to need gone thru.

Bike has straight exhaust pipes and pod filters.

What all do I need to get?
What size jets and where do I get them from?
I can build anything but have never rebuilt carbs before, so this will be a first for me!

So, guru's, throw the man a bone!!!

1 - 1 of 17 Posts
Those slip-in baffles should be beneficial to the performance and the valves.... (TIP: I also suggest you use a through bolt that goes all the way across the pipes...I'm unsure as to the technical aspects, but my bike always seem to improve with the addition of this "splitter" bar ).... Steve
1 - 1 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.