Honda Twins banner

61 - 62 of 62 Posts

·
Registered
Joined
·
314 Posts
Discussion Starter #61
The stock wiring loom was in such bad shape when I took everything apart, burnt wires, spliced wires etc.... it all had to be replaced, instead of buying a replacement I just rebuilt completely. The Pamco unit comes with its own leads from the E-Advancer which I installed back by the battery. The original wires to the points system were removed from the loom as they were no longer needed and I did not want "extra" wires sticking out of my harness. I could just run the two new wires from the points in a separate jacket but along side the main wiring harness. Just not very clean.
 

·
Registered
Joined
·
625 Posts
Ah, I see, that IS a problem. On the upside, you can now run either one. I've had initial issues with the PAMCO on both my bikes, both of which are running reliably now. One after 2 years, and after 2 months.
Some quirks with the timing.
 
61 - 62 of 62 Posts
Top