[patrickob17]

Hello, I'm struggling with getting fuel into my carbs. I took the petcock off and cleaned the crap that had built up in there out with seafoam then took the air compressor to it and got airflow through both outlets on both the reserve and the on position when set to those positions, however fuel still won't flow out to the carbs. Any ideas on what I should be doing and checking to see what's wrong with them or how to get my fuel lines flowing again? Thanks.

 

[J-T]

Just to be clear, are you saying that if you fill the tank with fuel and turn on the petcock with no hoses connected fuel does not come out of the petcock?

 

[patrickob17]

Okay so when no hoses are connected it will flow out, so I'm assuming that means I've gotta just go through and adjust my float levels to allow fuel to flow.