Honda Twins banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
hey y'all,

a while back my cb350f was losing power and had a lot of noise from the cylinders. after it died on me i took apart the top end to find that i had a broken piston ring. i changed them out, deglazed my jugs, and put the engine back together. it ran with a sputter, and some backfiring. on a test ride, it died on me. i didn't trust the cheap rings that i used so i changed them out again, and now it won't start.

i am getting spark from all plugs/wires, getting gas, and the pistons are moving freely. the timing marks are lined up. **there was a hiccup when the bushing from the cam chain tensioner fell into the engine and was obliterated. i retrieved and replaced it and now i can turn the engine over smoothly. still no start though. any ideas appreciated. please and thanks
 
1 - 1 of 1 Posts
Top