[Mr B]

HI,
I am refurbishing a cb250n Superdream 1981 model and am trying to find out what size allen key will fit the fork spring retaining nut in the fork leg? I have removed the cap from the top of the fork leg but my manual doesn't say what size this retaining nut is. Any ideas?
Thanks


Sorry, I think I have posted this in thwe wrong area.

 

[sunny1476]

Big, checked today and its around 15mm. I haven't anything close so i can't say for sure. Will get back to you when i find one that fits.

 

[longdistancerider]

Moved to SOHC Suspension section
It should be a 14mm Allen wrench

 

[Alan F.]

Just find a bolt with an appropriately sized head, weld on a t-handle or just clamp the bolt in visegrips. No need to order up a large Allen wrench just for this job.