Joined
·
1 Posts
Just got one of these given to me and I am trying to see if anyone has a link for the pdf manual? It would be greatly appreciated
1980 cm200t manual
1 - 20 of 51 Posts
Joined
·
23,965 Posts
PM sent
Joined
·
23,965 Posts
PM sent
Joined
·
23,965 Posts
PM sent
Joined
·
25 Posts
Seems to be a common request. Do you really have the 1980 CM200T manual in PDF? Just bought a reasonably low mileage one. Its my first two-wheeler since my 1970's Honda Expresses many year back.
Thank you,
Justin
Thank you,
Justin
Joined
·
23,965 Posts
PM sent
You’ve been sending plenty of those manuals, so no problem if you’re tired of doing so. I thought I’d ask anyways if you could send me one as well.
Head scratching a little too much over here
Joined
·
23,965 Posts
PM sent
Joined
·
1 Posts
81 can't be too different, can I get that?
Joined
·
13,023 Posts
I'm sure someone will be along with what you need - but after that, you should take a look at this
https://www.hondatwins.net/forums/23-member-introductions/121120-critical-read-before-posting.html
Joined
·
23,965 Posts
PM sent
Joined
·
1 Posts
My first bike! I really want to get in and service it correctly. I know you must be tired of sending that manual. I would really like to get a copy.
Please!
Thanks!
Please!
Thanks!
Joined
·
13,023 Posts
Jim never seems to tire of helping people... I can only speak for myself, but I certainly enjoy sharing any info I can with those who need a tip or two along the way to getting their vintage bike on the road - and it's a shared passion for most of us. Congrats on your first bike! He'll be along soon with a PM with the manual link... and since you're new here, please take a look at this in the meantime and post an Introduction, so we can get to know you and your bike to better help when you need it.
https://www.hondatwins.net/forums/23-member-introductions/121120-critical-read-before-posting.html
Joined
·
13,023 Posts
I'm sure you will... and please read the link in the post directly above about an Introduction in the meantime. Jim will be along soon with a PM to you that includes a link to the manual
Joined
·
23,965 Posts
PM's sent
Joined
·
1 Posts
Hi Jim,
If you're still able to do so, I'd appreciate if you could send me access to the CM200T manual. Thank you very much!!!
I just bought a very clean bike, brought it home last night and it gushed oil. This after zero drips seen riding and running for quite a while. Turns out the output shaft seal had popped out. I want to replace it but it feels like there should be something to hold it in. It can be pushed about an inch into the bike. Anyway, the manual will answer my questions. Thank you again for doing God's work.
If you're still able to do so, I'd appreciate if you could send me access to the CM200T manual. Thank you very much!!!
I just bought a very clean bike, brought it home last night and it gushed oil. This after zero drips seen riding and running for quite a while. Turns out the output shaft seal had popped out. I want to replace it but it feels like there should be something to hold it in. It can be pushed about an inch into the bike. Anyway, the manual will answer my questions. Thank you again for doing God's work.
1 - 20 of 51 Posts
