Honda Twins banner
1 - 1 of 9 Posts

· Premium Member
23,963 Posts
The oiling problem for the left rod is in the design. The right main bearings feeds the right rod and supplies the right side of the head. The left main bearing feeds the starter clutch and supplies the left side of the head. The center main feeds the transmission, balancers and the left rod. Only solution I have would be to get the crank drilled for the left main to supply the left rod.
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.