[Eastonboy99]

Hello,
On my CL350 there is a nut connected to the swing arm that holds it in place. I have stripped the nut and am looking to replace it. On bikebandit and in the manual, it says the nut is a 14mm but the one on my bike is 24mm. Is 14 mm correct?

For reference, it is part 18 in this diagram https://www.bikebandit.com/oem-parts/1973-honda-scrambler-350-cl350k5/o/m151866#sch396035

 

[chaindrivecharlie]

Do you need the castle nut or the pivot bolt?
Got pics, that helps! Nut should be 24mm and bolt 14mm?

Sent from my SM-N920R4 using Tapatalk

 

[chaindrivecharlie]

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/311810179318

Sent from my SM-N920R4 using Tapatalk

 

[66Sprint]

Both nuts and bolts are "sized" by THREAD diameter, NOT by the size wrench you use on them.....

 

[J-T]

That's 504!

 

[Eastonboy99]

That makes sense! Thanks!

Sent from my SM-G950U using Tapatalk