wheel

I'm working on a custom build based on a '78 CM185. I'd like to go up to 18" tires front and back while retaining the original hubs. Never attempted this before, but I know it's possible (see Classified Moto's Tiny Moto - https://www.classifiedmoto.com/motor...85t-tiny-moto/). Does anyone know...

Hello, im looking to see if anyone has run into having the front wheel offset to the left. I measured the gap between the tire and the fork both left and right side and there seems to be more space on the right side. I had this issue before and after installing new bearings and I believe I have...

I'm restoring a '72 cb450 and I've started cleaning the front wheel. It has lots of rust eating away at what I'm guessing is chrome. I'm wondering if this severe type of rusting is repairable or if the wheel is even safe to use. The rust hasn't gone all the way through but could it? Here's the...

Hey Guys! I am in the process of building a track bike out of my 1981 CM400e and have stripped it down to the components I will keep. I have: Swingarm and brace-$20 Rear Tire with drum brake hub and axle-$35 Front Tire with brake drum and axle and brake cables-$35 Front Forks with upper...

i'm having a hard time finding any definitive dimensions on a CB350 twin's two rear wheel bushings, part numbers 42311-349-690 + 42313-286-000. I ripped my rear wheel apart and have both of them (learned the hard way about the bearing collar that's no longer available), but they are different...