Honda Twins banner
shifting
1-8 of 8 Results
  1. Engine Discussion
    My 350 is difficult to shift into neutral whether from 1st or 2nd. It always slips past neutral and goes from 2nd to 1st or vice versa. I have the crankcase apart and i noticed the neutral “peak” on the shifting drum stopper has no notch in it to keep it in neutral. Ive attached a photo of my...
  2. Engine Discussion
    So I was able to score this bike for free and it runs really well. It has been my commuter for a few weeks now. Well today I was riding to work and went change gears and the shift lever was GONE. I was able to pull off the to the side of the road and search for it. Long story short I found the...
  3. Miscellaneous Discussion
    So I have an issue. 1975 CL360. From neural to first gear I can shift just fine, but then shifting up to second the bike stays in neutral. If I use my hand to quickly grab the lever down to first then up to second I can sometimes get it into gear and then the rest of the range up to sixth is...
  4. Engine Discussion
    I have a 70 CB450K3 and the splines on my shift shaft have been almost completely worn down. I was wondering if I needed to split the cases in order to replace the shaft or if there is an easier way to go about it.
  5. Engine Discussion
    I just replaced the clutch on my 78 CM185T. I had it in neutral the whole time, after replacing the clutch and adjusting the cable at both ends, I started it, shifted into gear and started riding, would shift anymore. the clutch disengages properly, there were and are no weird noises. the...
  6. Engine Discussion
    Hey guys, first time poster. I only came here because I thought it might be worth asking advice before tearing the engine out of the CL175 to replace the kickstart shaft that's not functioning. So, a little background on me: Owned a few vintage hondas, I've rebuilt some engines and...
  7. Engine Discussion
    I've searched and searched and have found threads with similar problems but never any answers. I have a CM400T with about 36K on the motor. Last few weeks it has been slipping out of gear when in 3rd. Sometimes in 2nd. Clutch adjustment seems proper and I do not think it's a slipping clutch...
  8. Engine Discussion
    My bike isn't shifting very smoothly. I can get it through all the gears, but sometimes it "hangs up" on one of them, or somehow goes into neutral between the gears. Im able to ride it, but I would like it to shift little better. The other odd thing was that I noticed the neutral drum stop...
1-8 of 8 Results
Top