Honda Twins banner

parts

  1. Looking for CB200T Parts

    Parts For Sale
    Hello everyone! I just acquired a 74 CB200T I’m looking to restore and transform into a Cafe Racer. I’m in need of a few engine parts to get it up and running. I will have more parts to add to this list I am just waiting on the mechanic to get back to me. Anyone that has any spares please let me...
  2. Cm400t carb replacement

    Fuel Supply and Carburation
    I didn't do a keyword search but figured you guys might be able to help me on the best aftermarket or simply replacement carbs purchasable. What's a good site or seller that would ship to me? I have about 250-300$ to work with and am looking to install it asap. TIA
  3. Parts help

    Miscellaneous Discussion
    Looking for best place to get specific parts for 1980 cm400t Looking for throttle assembly from cable to hand throttle. And maybe some new carbs
  4. Hello from Dallas

    Member Introductions
    Hello, New (to me) owner of a '73 CB350G. After riding the bike for about two weeks I decided it was time to begin tearing down and rebuilding everything, as it seems that general maintenance went by the wayside over the last 46 years. Hoping to learn a lot along the way! Shameless plug that...
  5. 1973 CB350G Ball Retainer

    Wanted Parts and Bikes
    Hello, I recently purchased a 1973 CB350G. While combing through the bike I discovered the ball retainer in the clutch lever/lifter assembly within the left crank case is missing, part # 22860-286-000. Does anyone have one for sale or know where I might find one? I've searched all over ebay...
  6. Looking For A New Stator! Honda CB Infamy.

    Electrical Discussion
    Hey everyone! I have a Honda CB400A. And lucky for me, my CDI unit went out. As you all know, the CDI units on these bikes are famous for going out. So I’m getting a new one. The only problem is that new CDI’s for this bike are incredibly hard to find. And IF you happen to stumble across one...
  7. Wanted: Clutch - Clutch Cable Interface

    Wanted Parts and Bikes
    I need a few parts for my cb450. It would be great if someone out there had them; if not, could anyone point me in the right direction? I need: -front sprocket cover -Clutch lifter -adjuster -lever spring -fixing piece -cable joint and also exhaust headers and mufflers. I can't find them...
  8. For Sale Parts of old!

    Bikes and Parts For sale
    Item no;1,250/305 twin, sets ,new 2ea. 1Nice used right. Item2b,1 only new,some red background-29mm hole centers. 2a=new,2 pairs- small honda of old? 3-ea. 150 plastics,poor Ugh! 3 ea. 4, 2ea. Will polish well, same as2A but used 33mm c’s 5 450 new , 3ea. 6 ,2ea 500-4,1new ,1almost new 7,New...
  9. 71 SL350 Parts

    Wanted Parts and Bikes
    Im working on a restoration for my dad. Im currently in need of a shifter shaft, shifter, possible cyclinder jugs and/or pistons. That should get me started on the engine. I know im gonna need a carb rebuilt kit and gasket kits. Im just trying to get the big stuff for now. Thanks guys and gals
  10. parting out '64 trail 90 / ct200

    Parts For Sale
    like title say, all is there, most in fair condition cept the head is rusted out PM me if interested
  11. Various CB350 OEM & Aftermarket Parts

    Parts For Sale
    Hello Folks, I have here a whole bunch of parts for a 1970 Honda CB350K2 that I am looking to sell. If there is any serious interest in the items listed please direct message me. Payment is preferred through PayPal. Shipping is included in the price posted. I will add more to this thread...
  12. New Owner: 1981 CM400T

    Miscellaneous Discussion
    Hi there, So excuse my ignorance but I have a couple of questions that are mostly parts related: I am looking to replace my grips because mine are extremely worn down. I think the size I need to buy is 7/8" in but can someone confirm that my '81 CM400T would use 7/8" grips? Also I don't have a...
  13. WTB Complete 75'ish CB200 Parts Bike

    Wanted Parts and Bikes
    I am looking for a complete parts bike for odds and ends it can be rusty as can be with a seized motor. I am looking within a two hundred miles of central Illinois, further if needs be. If you have one for sale or know where I could find one please send me a PM or email me at [email protected]
  14. Internals- What's the deal with parts?

    Engine Discussion
    So I found rusted valves in the head of my motor so I immediately decided to find a "rebuild kit" and plan out the process but I cant seem to find parts through obvious google searches which leads me to believe we have to search for parts by spec rather than by application? I haven't found...
  15. Help! Broken engine screw.

    Tips And Tricks
    I am really new to motorcycles and last month purchased a 1979 cb400. Long story short I was attempting to replace the head gasket when I BROKE one of the top two screws in half (not even sure what to call the part, the top screws when you are first taking off the top of the engine). Anyways now...
  16. Exhaust pipe to power chamber gasket for '78 CB400TII

    Miscellaneous Discussion
    Hi all, I’m looking for some help. I'm trying to find the right part for a 1978 CB400TII. I hope this is the appropriate form section for exhaust questions. When I purchased the bike, the PO talked me through the work that he had done already, and the things he hadn't gotten to. He mentioned...
  17. 1982 CB450SC Part Out

    Parts For Sale
    Hello All, I just picked up a Nighthawk 450 with no title. The engine, handlebars, ignition, kill switch and headers won't be sold. Everything else is fair game. PM me or post what you are looking for and where you are (zip code) and I will get back to you with pics and prices. I will post pics...
  18. Wanted: 1973 Cl350 Parts

    Wanted Parts and Bikes
    Hello, I am looking for the following parts in relatively good condition: I have a 1973 Cl350. --Chrome Fork ears--need to be straight and not bent/warped etc. A little rust is ok, I will be blasting and painting them --Side Covers--both sides with no cracks and tabs missing (preferably the...
  19. Rebuilt carb without one piece

    Fuel Supply and Carburation
    Hey guys I found this piece in my parts bin...don't know where it might go in the carb. Any thoughts? Mud
  20. CL175 1969, can I use different different year model parts?

    Miscellaneous Discussion
    Hey All! I am new to the entire motorcycle game, so forgive me for my complete unknowing of everything. My dad bought a 1969 CL175 back in the 70's when he was a teenager, drove it around, loved it, and stored the bike in Sacramento, CA for 40ish years. The bike ran when he put away. My father...
Top