Honda Twins banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Fuel Supply and Carburation
    If you have a CB175, could you take a look at the manifolds between the carb and engine and look for a faintly stamped number on the top edge above the bolts? You will need a flashlight, but the numbers are visible without removing anything from the bike. Once you find that number could you post...
  2. Engine Discussion
    Hello everyone, I own a 1970 cb350 twin and the previous owner fit it with a 2-1 exhaust that unfortunately covers the oil drain plug. When I was disassembling the exhaust manifold/collar assembly to access the drain plug, I must have not been paying close enough attention (I know, rookie...
  3. Fuel Supply and Carburation
    My old intake manifolds had a junked up gasket surface, and so I went at the first with a razor blade, cleaning it up down to the metal. Now I wonder if i wasn't supposed to do that. So I have one with exposed metal, another with a rough old gasket surface. I don't think I can take the gasket...
  4. Miscellaneous Discussion
    Hi everyone, I've seen a few posts about exhaust systems but haven't found exactly what I'm looking for. Though, there's a lot of good material on this site I haven't found exactly what I'm looking for. I need to replace the exhaust (pipes, manifold, muffler) on my CJ360T. I was hoping to...
  5. Fuel Supply and Carburation
    Hi folks As I told you in my CB200's log, I bought wrong intake manifolds few weeks ago... Everything was set to start the engine and the manifolds spoiled my happiness... Back to search for the right ones. Once is very difficult to find the original rubber manifolds here in Brazil, I'm here...
1-5 of 5 Results
Top