Honda Twins banner

intake

  1. Fuel Supply and Carburation
    Can someone tell me what the exact part name is for item #24 in the image below? I snapped one on my '66 scrambler and need to replace it. Thanks!
  2. Fuel Supply and Carburation
    Anyone find a set of compatible aftermarket air intake boots (rubber tube between carburetor and airbox) that fits either a CM400A and/or CM450A with stock carbs and airbox? Honda sold 'em with the airbox on these bikes, which means no separate part number for me to search. Apologies if this...
  3. Fuel Supply and Carburation
    First, I have a 1970 SL350 with 722A carbs I've had issues with my right cylinder firing intermittently, and judging by the spark plug, is running very rich. So today I pulled my 722A carb apart and cleaned out every hole. The carb was rebuilt before the bike was running at all: Diaphragm is...
  4. Fuel Supply and Carburation
    Hi folks As I told you in my CB200's log, I bought wrong intake manifolds few weeks ago... Everything was set to start the engine and the manifolds spoiled my happiness... Back to search for the right ones. Once is very difficult to find the original rubber manifolds here in Brazil, I'm here...
  5. Parts For Sale
    Does anybody need a nice clean set of both intake and exhaust cams? Slightly worn but totally run-able. I swapped out an equally worn set over a year ago and these have been taking up space in my garage since. A steal at $60 for the pair plus shipping. Text or call Seth at 732-682-7803...
  6. Wanted Parts and Bikes
    I'm looking for cylinder walls/jugs for a CB450 in decent condition. I will be over-boring them to 71.5 mm, so if they aren't perfect on the inside, its fine. I do want all the fins intact and the exterior in decent condition. I'm also looking for an intake cam if anyone has one sitting...
  7. Engine Discussion
    Has anyone ever done the dremel tool port and polish? I was thinking about tking a flap wheel to my head while I've got it off and giving her a good once over polish for good measure. Any thoughts? Also I'm looking for any suggestions for getting all that nasty carbon buildup off of the dome and...
Top