Honda Twins banner

controls

  1. Wanted Parts and Bikes
    I am in need of new controls with good wiring for my cb350 k3. Working condition, but exterior doesn’t have to be perfect. Need the controls with the clutch/brake lever attached. I’ve searched eBay and found nothing in decent condition. Please PM me with what you have! thanks!
  2. Tires, Wheels, and Brakes
    The clutch lever assembly on my 78 CB400TII is damaged; the lever it’s self is fine, but the Metal in the lower hinge is broken, so the lever moves up and down. I bought generic lever assemblies, since piston in master brake cylinder was also bad, which works great in right side, but as you will...
  3. Electrical Discussion
    hey guys, ok, so I have a 1978 cb400 hawk II that I've done some work to and after putting everything back together I see a strange problem. I replaced the left-hand controls completely, there was an electrical problem with the horn button that started a small fire in the controls. The horn...
  4. Electrical Discussion
    I have a 1975 CB200T and I have repaired my starter button several times. The internal plastics are cracked and broken and held together with tape. Does anyone know of where to get a replacement one? This is the button inside of the Throttle control which toggles between the headlight being on...
  5. Electrical Discussion
    I am replacing the switch with an aftermarket switch. The current switch has 8 wires. There is a Blue, White, Brown, Yellow, White/Yellow, Black/White, and 2 black wires. Here is what I know... The Blue wire is the high beam and the White wire is the low beam to the headlight. The Brown is...
Top