cb200t

I have in my storage unit a 1976 CB200t in parts, with title. Located in Olympia, WA. I'll take pictures of the parts next time I'm at the unit (this week). Below is the build thread I had for this bike in 2010...

hello all. I am very new to this forum and to re building motorcycles. I am 16 years old and decided to try and get my grandfathers old cb200t up and running again its been sitting for about 30 years. The first step i took was to check if the battery was any good and it wasnt so i purchased a...

New Rider and Owner. I decided to jump in head first and picked up a Barn find CB200 to restore. Sitting for 30+ years. Rusted pretty bad but I was told the engine moved and had good compression. But after getting it home the kick start won't engage and the transmission seems to only go as far...

Hello guys, I'm working on a 1976 CB200T. The previous owner had the slides in the wrong carbs. I've got them oriented correctly now and on the correct sides of the bike. I dialed in the idle-stop and idle-air mix screws and it was running fantastically, idling around 1400 RPM. I started to...

For the past year, I have battled the carbs on my 1976 CB200T. The bike ran great but would never idle. Lately, the bike felt like it was running out of gas when riding above 55 mph for an extended period of time. I ended up putting on after market pre-tuned carbs and she idles like great...

Hey guys! Just a new member here that got my hands on a 1976 CB200T it near mint condition. (wrapped in a storage since 1978!) Anyways, I've done a complete resurrection by changing the tires, new tubes, new battery, new plugs, new coil, and complete carb clean and install. However, having...

Hello everyone, I'm a new member to this forum. I have been trying without success to locate two OEM slow jets for my 1975 Honda CB200T. I recently purchased two lousy eBay carburetor rebuild kits, but the provided replacement slow jets are making the bike run way too rich at idle even though...

Hey guys, I have a '75 Cb200T and it's having some problems. I'm new to the forum so I apologize if anythings out of order. I can start the bike but it revs high right away and will stay and idle at around 4,000 rpms (I know that's a lot higher than it should be and I've tried looking for vacuum...

"Skinny Bastard" CB200 1975 - Brazilian Project Hello guys I just bought a "brand old" Honda CB200 1975. I believe in US it's called CB200T in 1975, but mine came from Japan to Brazil without the T... Actually, very few of these bikes arrived in the country and even less survived across...

Hello all! I hope everyone is enjoying this nice weather we are having. Unfortunately my rear tire is experiencing a leak around the rim where the rubber hits the metal (no specific spot). Does this mean I need a new tire? My wife says I should get new tires no matter what, and she is probably...

I have what could be a dummy question but figured I'd bare the shame rather than ruminate on this idea. I noticed that my left side carb insulator is not fulling sealing at the cylinder head. I found this out by spritzing it with carb cleaner. The engine instantly died. :sad: Looking into a...

So I am having a hell of a time finding the correct part for my bike. Every left hand switch assembly I see does not include the headlight switch, they just come with the horn and turn signals. Here's the assembly I bought on accident next to my old broken one: If anyone knows where I can buy...

Hello all, I am new to this forum but am hoping someone could help me. Last November, I sold my piece of junk car and bought the CB200. I had never really ridden anything other than dirt bikes but I was all about it. I chose the cb200 because it is so open and easy to work on/get to know and...