Honda Twins banner

cb200t

  1. 1975 CB200T Mystery Leak

    Engine Discussion
    I'm gonna start off by apologizing, because I'm completely new here, and to this bike, and I'm probably gonna sound like a big dumbass, but the other day I walked outside to an unusual smell. Bike had been sitting unridden for close to a week, and there was now some new... residue under it, and...
  2. 1975 CB200T Mystery Leak

    Engine Discussion
    I'm gonna start off by apologizing, because I'm completely new here, and to this bike, and I'm probably gonna sound like a big dumbass, but the other day I walked outside to an unusual smell. Bike had been sitting unridden for close to a week, and there was now some new... residue under it, and...
  3. CB200T 2 extra connections? A Ground and a Black

    Electrical Discussion
    In making a new loom, the wiring diagram is clear....except for this stray ground connection. See photo. Is it just an extra ground connection for future use? Just wondering if I need to include this connection in the new loom. I just wire up a new regulator/rectifier combo and was able to...
  4. CB200T Front stop switch assembly connection

    Electrical Discussion
    I’ve searched around for a CB200T specific front brake switch restoration and haven’t found a post with good images. I’m remaking the electrical loom from scratch for the learning kicks. Highly recommend. It’s difficult to describe the sense of immense satisfaction when the wiring diagram...
  5. ‘76 CB200T stalling when I downshift

    Engine Discussion
    Hey everyone, so I have a 200T I’ve been working on, it would run fine for a few minutes and then start only running on one cylinder, I rebuilt the carbs and put acetone in the tank to melt the epoxy liner off of the inside, out everything back together and it ran fine for about 45-50 miles...
  6. CB200T Fitting high density plastic bushings to swingarm

    Frame, Suspension and Steering
    Hi guys. I’ve got some new bushings to fit on my newly powdercoated swingarm. Thrilled. The bushings are a kind of high density plastic. Do you recommend heating the swingarm up in the oven and fitting these bushings? Will the heated swingarm warp or damage the bushings? I was then going to...
  7. Looking for a Cb200t tach side cam cover

    Wanted Parts and Bikes
    My cam cover cracked along the casting line and sheered the tach gear as well. looking to buy a replacement.
  8. CB200T Oil seal removal from points base

    Engine Discussion
    Could anyone help me with getting a stubborn oil seal out of the points base (CB200T)? I’ve bunged it up with some pliers already so there’s no turning back. I’ve got a new one on hand. There seems to be metal under the rubber portion. I just want to make sure it’s ok to be grabbing this as part...
  9. New Member Introduction

    Member Introductions
    Folks, I guess I was supposed to introduce myself before submitting a first post...oops! Apologies! Anyway, Greg here. I'm a little NE of Sacramento, California. I've been mostly focused on building cars / trucks (51 Chevy 3100 p/u, 63 Chevy C10 p/u, 54 GMC 100 p/u, 64 Triumph TR-4) but was...
  10. 1975 CB200T

    Electrical Discussion
    Hey all. It has been a while since I've been on here but because of this covid virus ive got an excuse to make some time to do some wrenching on my moto. Ive been working on restoring it since october 2018 and have had to take a break for the past 10 months or so. But now im back. Quite a...
  11. Happy to be a new member

    Member Introductions
    Hello, fellow HondaTwins members, After my 3rd son was born my amazing wife asked me to sell my Honda VFR. She was an X-ray tech and saw too many victims of bike mishaps. I complied. That was 21 years ago and this weekend I reentered the world of motorcycling with her support. I brought home a...
  12. '75 CB200T Restoration - Lady Wrencher

    Project Logs
    Working on a Candy Gold Metallic '75 CB200T as my first bike to restore. Kind of debated on whether to specify the "lady wrencher" part but if it inspires more women to tinkering around with mechanics, then I'm all for it. I'll be asking stupid questions and for sage advice throughout the...
  13. *vroom* from Redwood City, California

    Member Introductions
    Hello everyone, Piping in from Redwood City, California. New rider with an old motorcycle! A 1975 CB200T in Candy Gold Metallic. I'm breaking it down, learning the mechanisms, polishing bits, and plan on riding it stock for a while, at least. I don't want to do anything to her that is not...
  14. project bike: 1975 Honda CB200T

    Member Introductions
    Hey guys, I am the proud owner of a slightly running 1975 Honda CB200T and I am proceeding with disassembly and servicing and what not. This is my first motorcycle and my first time working on one but my teacher helped me convince my parents to let me do it as an extra credit kind of thing...
  15. Carbon fouling plugs CB200T

    Fuel Supply and Carburation
    Gentlemen, I need help from the experts here. I have a 1975 CB200T which I got last year. I have solved most of the issues however I am stumped now. It appears to me that It is running too rich do to carbon fouling of the plugs. They are not wet with gas, just black with carbon. Also, the...
  16. Gas in engine oil

    Engine Discussion
    Help! I have a 1975 CB200T and I was checking my oil and noticed it was very thin with a gas smell. When I drained the oil it flowed out like water. I have seen some one else in the forum talk about gas seeping into the case, but I could not find the thread. Does anyone else have this issue and...
  17. Starter button for 1975 CB200T

    Electrical Discussion
    I have a 1975 CB200T and I have repaired my starter button several times. The internal plastics are cracked and broken and held together with tape. Does anyone know of where to get a replacement one? This is the button inside of the Throttle control which toggles between the headlight being on...
  18. 74 cb200T - Starts and throttles up but won't idle

    Engine Discussion
    Just bought this new project bike and got it to start and throttle up but it dies when I let off the throttle. After running the bike for a bit the left exhaust pipe was still cold and while the right was hot. Any ideas on what could be wrong? Spark plug has a spark because when I removed the...
  19. WTB Complete 75'ish CB200 Parts Bike

    Wanted Parts and Bikes
    I am looking for a complete parts bike for odds and ends it can be rusty as can be with a seized motor. I am looking within a two hundred miles of central Illinois, further if needs be. If you have one for sale or know where I could find one please send me a PM or email me at [email protected]
  20. New Frame

    Frame, Suspension and Steering
    My 75 cb200t has rusted through on the neck. I thought about welding a fix but I would rather pick up a new frame. I see a few frames on line but they all come with a Bill of Sale only. Does anyone have any experience getting a new frame on your title? Especially in NC. Thanks
Top