Honda Twins banner

Search results

1-20 of 494 Results
Advanced Search
  1. Storing outside without rusting tank?

    Miscellaneous Discussion
    Take the tank off and store inside.
  2. I'll take NOS for $300, Alex...

    Found For Sale
    This one is cheaper https://www.ebay.com/itm/NOS-Turn-Signal-Flasher-for-1963-1964-Corvette-Signal-Stat-142-12V-Flasher-/113912871657 and even cheaper https://www.ebay.com/itm/1969-70S-SIGNAL-STAT-142-FLASHER-HONDA-CB750-CB750-KO-RECTANGULAR-2TERMINAL-NEW-/251011707238 rock bottom...
  3. New member, believe I have a '72 CL450

    Member Introductions
    It might be a whole lot easier to find another engine, sounds like that one was really butchered. You might be able to find a CL engine to get it going back to original.
  4. CB500T colour wiring diagram

    Manuals and Technical Documents
    Thank you. I had started working on one but work got in the way since my company has downsized, more work has been dumped on me.
  5. Interesting observation

    Off Topic
    Maybe Oregon and Washington have been having a sale, seems the two places most of them are at.
  6. Idled really high, then leaked milky looking oil everywhere..

    Engine Discussion
    milky oil means water has gotten into it, white smoke seems to confirm it has gotten water in the engine. DO NOT START IT AGAIN! change the oil, the water may have made the level too high and it puked out. Sounds like you need to thoroughly go through the bike since it sounds like it was not...
  7. Going to be syncing the carbs on the bike.

    Fuel Supply and Carburation
    out of adjustment would cause rough running, not out of sync.
  8. Going to be syncing the carbs on the bike.

    Fuel Supply and Carburation
    a light spray of starting fluid in the right side carb intake will let you know if it is a fuel or ignition problem. If it fires off with the starting fluid it is a fuel problem. Lots of threads on here about "thoroughly" cleaned carbs that end up with carbs not being fully cleaned. Completely...
  9. Going to be syncing the carbs on the bike.

    Fuel Supply and Carburation
    Carb sync won't help, cold cylinder is not firing, you need to fix that before syncing.
  10. Idle hanging at about 3K

    Electrical Discussion
    check for a curl in the throttle cables.
  11. led and regular bulb mixed together blowing flasher ?

    Electrical Discussion
    no, LED flashers are just timed relays and don't use amp draw to flash.
  12. 76 cb 500t

    Electrical Discussion
    If your voltage is not changing with revs, you are not reading its output. Either your meter is still set to DC, your alternator is bad and/or battery voltage is bleeding back from a bad rectifier or the system is not wired in correctly.
  13. Vacuum Synching carbs after rebuild/clean up, Issues

    Tune Up
    a light spray of starting fluid in the cylinder not firing will let you know if it is fuel or ignition related. If it fires off on the starting fluid it is a fuel problem. Lots of threads about "thoroughly cleaned" carbs still being clogged. You cannot sync the carbs until all cylinders are...
  14. Vacuum Synching carbs after rebuild/clean up, Issues

    Tune Up
    Need to know what bike you have. first you need to get all cylinders running or syncing will be worthless. Syncing is only getting all of the carbs to flow the same amount of air so unless you have a bike with a "master carb" it doesn't matter where you start you are just trying to get the...
  15. Have a butchers at these ...

    Off Topic
    Body snatchers?
  16. Have a butchers at these ...

    Off Topic
    Looks like a bunch of pratts have been wrenching on them.
  17. carb safe lubricant to ease the attachment of boots

    Tune Up
    I just use silicone spray.
  18. CB450K6 Cluster Lighting Issues

    Electrical Discussion
    Here is a modified diagram for a modern RR conversion but should be fine for you. Any auto motive 12V test light or multi meter would be fine.
  19. Cb450k6 Issues Please help

    Fuel Supply and Carburation
    Also see if the throttle cable has curled at the ends where it connects to the carbs, this can also hold the carbs open.
  20. Tons of CB450 and CL450 Parts

    Parts For Sale
    f you have the whole assembly, what do you want for it?
1-20 of 494 Results
Top