CL 350 Right hand control wiring help
Results 1 to 7 of 7
  1. #1
    Junior Member 72SCRMBLR's Avatar
    Join Date
    Jul 2014
    Posts
    4

    CL 350 Right hand control wiring help

    Hello, Im new to the boards but ive lurked around here for quite some time. I'm currently working on CL350 brat project. Im about 90% finished but im stuck with wiring. I recently purchased a simple and clean start/stop/run control switch from DCC and Im having a hard time understanding the wiring schematics. Thanks to Honda Twins and all the info you guys have ive been able to successfully install the hi/low light switch.



    Now this is what im dealing with... CL 350 Right hand control wiring help-img_0595.jpg

    Instructions indicate:

    blue/white- starter
    red/black - run/kill
    black -starter
    red/white run/kill

    Thanks Guys, any help at this point is greatly appreciated.

  2. #2
    Supporting Member Yendor's Avatar
    Join Date
    Aug 2011
    Location
    Camden County, New Jersey - USA
    Posts
    2,901
    Here's a basic standard wiring diagram. it's of high enough resolution you can print it like a poster IE: 2 sheets wide x 2 sheets tall. Makes it real easy to trace the circuits.

    Just save it to your PC then use a Photo Shop app to print it. You'll have to match up the functions.
    Attached Thumbnails Attached Thumbnails CL 350 Right hand control wiring help-wiring_cb350_stock_wiring.jpg  
    1970 CB 350 CAFE - Current Project on the bench,
    1972 CB 350 K4 Red - Now a Happy Rider ! !
    1972 CB 350 K4 Green (My Sons) DONE - YES !,
    1st Bike 1970 SL 350 (Brought home in Parts - Trailer/Trunk/Back Seat - I miss that bike),
    2nd - Bike Kawasaki 750
    3rd - '73 XLCH 1000

  3. #3
    Sensei 66Sprint's Avatar
    Join Date
    Sep 2008
    Location
    Roanoke, Virginia
    Posts
    25,960
    On your 350, the blue/white can go to Honda yellow/red, and you ground the Black wire.....
    Red/black to Honda black...... Red/white to Honda Black/white stripe (to coil +'s)

  4. Remove Advertisements
    HondaTwins.net
    Advertisements
     

  5. #4
    Junior Member 72SCRMBLR's Avatar
    Join Date
    Jul 2014
    Posts
    4
    Quote Originally Posted by 66Sprint View Post
    On your 350, the blue/white can go to Honda yellow/red, and you ground the Black wire.....
    Red/black to Honda black...... Red/white to Honda Black/white stripe (to coil +'s)
    Thanks for your help! Wiring is all done for the exception of the honda's white and yellow wires.

  6. #5
    Junior Member 72SCRMBLR's Avatar
    Join Date
    Jul 2014
    Posts
    4
    OK I actually found from another post that the yellow and white wire CAN be connected together IF Im planning on keeping lights always on? Is this correct?!

  7. #6
    Sensei 66Sprint's Avatar
    Join Date
    Sep 2008
    Location
    Roanoke, Virginia
    Posts
    25,960
    Yes, the HARNESS ends of the white (with yellow tag) and yellow wires can be permanently plugged into each other..... Make sure NOT to confuse the headlight white wire....

  8. #7
    Junior Member 72SCRMBLR's Avatar
    Join Date
    Jul 2014
    Posts
    4
    Quote Originally Posted by 66Sprint View Post
    Yes, the HARNESS ends of the white (with yellow tag) and yellow wires can be permanently plugged into each other..... Make sure NOT to confuse the headlight white wire....
    All done! Thank you for all of your help.

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

1964 cb350 wiring harness

,

cb350 wiring

,

cl350 right hand control

,

diagrams of 64 cb350 wiring harness

,

honda cb350 switch red and black

Click on a term to search our site for related topics.