Who knows the most about The 754A carbs.
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22
Like Tree10Likes

Thread: Who knows the most about The 754A carbs.

  1. #1
    Member 8Ball's Avatar
    Join Date
    Feb 2017
    Location
    Arizona
    Posts
    43

    Who knows the most about The 745A carbs.

    I have looked everywhere on the correct location for the jets under the Diaphragm #150 #50 #85 yeah i unscrewed them to clean and now well need help really bad Guys.Thxs Mike
    Last edited by 8Ball; 02-19-2017 at 10:17 AM. Reason: carb #s were wronge
    Life is a long highway it's up to you how you travel down it.

  2. #2
    Senior Member doode's Avatar
    Join Date
    Mar 2014
    Posts
    1,071
    Tubes or jets?

    I don't understand what your problem is. Can you please re explain?

  3. #3
    Member 8Ball's Avatar
    Join Date
    Feb 2017
    Location
    Arizona
    Posts
    43
    thxs Doode for reply,it's for a 74 CB360.there the jets on top of carbs just under the Diaphragm. tiny jets #150 #50 #85 hope this helps
    Life is a long highway it's up to you how you travel down it.

  4. Remove Advertisements
    HondaTwins.net
    Advertisements
     

  5. #4
    Senior Member doode's Avatar
    Join Date
    Mar 2014
    Posts
    1,071
    Im not clear why you're asking about them.

    What is it you are trying to do, or would like to do, or regret having done. Pls try and be clear with your response.

  6. #5
    Senior Member JHunt90's Avatar
    Join Date
    May 2016
    Location
    Spokane, Wa
    Posts
    227
    Are you confused on where they go? They each should only properly fit into one location.

    Sent from my SM-G930T using Tapatalk
    1973 Honda Cl350

  7. #6
    Member 8Ball's Avatar
    Join Date
    Feb 2017
    Location
    Arizona
    Posts
    43
    I'm sorry about not being clear,I'll try again I pulled the carbs off and took out all the Jets if you lookat my photo's you will see both carbs were filthy.so after cleaning everything i started putting togather.When i got to the top of the carbs where there are 3 hole that hold jets i forgot to write down where each one goes.on my carbs they Jets screw in not pressed in carb # is 745A i hope this helps explane my dilemma.Thxs Mike
    Life is a long highway it's up to you how you travel down it.

  8. #7
    Member 8Ball's Avatar
    Join Date
    Feb 2017
    Location
    Arizona
    Posts
    43
    Hi Jhunt90 Yeah i took them apart and didn't write down where they go. on my carbs #745A these jets screw in are't pressed in. so i'm lost on which Jet goes in what hole.Thxs for your help
    Life is a long highway it's up to you how you travel down it.

  9. #8
    Senior Member doode's Avatar
    Join Date
    Mar 2014
    Posts
    1,071
    Thanks for the explanation. After reading, your original post makes sense now.
    See link

    CB360 Carb Main Jet Debate (excerpt from brett_bike Project)
    8Ball likes this.

  10. #9
    Senior Member HondaCB200Lady's Avatar
    Join Date
    Sep 2015
    Location
    North East England, U.K.
    Posts
    1,027
    Another thread here, not sure if it has what you need to know. CB360 carb jet issue loctaion

    Irene
    8Ball likes this.
    Irene

    CB200 project bike
    1977 CB200 Olive
    1979 CD185

  11. #10
    Senior Member doode's Avatar
    Join Date
    Mar 2014
    Posts
    1,071
    HondaCB200Lady and 8Ball like this.

Page 1 of 3 1 2 3 LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •